| BS 1125:1987 | Specification for WC flushing cisterns (including dual flush cisterns and flush pipes) |
| BS 1184:1976 | Specification. Copper and copper alloy traps |
| BS 1188:1974 | Specification for ceramic wash basins and pedestals |
| BS 1189:1986 | Specification for baths made from porcelain enamelled cast iron |
| BS 1206:1974 | Specification for fireclay sinks: dimensions and workmanship |
| BS 1244-1:1956 | Metal sinks for domestic purposes. Imperial units with metric equivalents |
| BS 1244-2:1988 | Metal sinks for domestic purposes. Specification for sit-on and inset sinks |
| BS 1254:1981 | Specification for WC seats (plastics) |
| BS 1329:1974 | Specification for metal hand rinse basins |
| BS 1390:1990 | Specification for baths made from vitreous enamelled sheet steel |
| BS 1703:2005 | Refuse chutes and hoppers. Specification |
| BS 1876:1990 | Specification for automatic flushing cisterns for urinals |
| BS 2081-1:1998 | Closets for use with chemicals. Specification for portable closets |
| BS 2081-2:1998 | Closets for use with chemicals. Specification for permanently installed closets |
| BS 2081:Part 1:1980 | Closets for use with chemicals. Specification for portable and transportable types |
| BS 2081:Part 2:1981 | Closets for use with chemicals. Specification for permanent installations |
| BS 2893:1989 | Specification for chemical preparations for portable and transportable chemical closets (excluding those for use in aircrafts) |
| BS 3380:1982 | Specification for wastes (excluding skeleton sink wastes) and bath overflows |
| BS 3402:1969 | Specification for quality of vitreous china sanitary appliances |
| BS 3943:1979 | Specification for plastics waste traps |
| BS 4305-1:1989* EN 198:1987 | Baths for domestic purposes made of acrylic material. Specification for finished baths |
| BS 4305-2:1989 | Baths for domestic purposes made of acrylic material. Specification for connecting dimensions |
| BS 4880-1:1973 | Specification for urinals. Stainless steel slab urinals |
| BS 5412:1996 | Specification for low-resistance single taps and combination tap assemblies (nominal size 1/2 and 3/4) suitable for operation at PN 10 max. and a minimum flow pressure of 0.01 MPa (0. 1 bar) |
| BS 5503-2:1977 | Vitreous china washdown WC pans with horizontal outlet. Materials, quality, performance and dimensions other than connecting dimensions |
| BS 5503-3:1990 | Vitreous china washdown WC pans with horizontal outlet. Specification for WC pans with horizontal outlet for use with 7.5 L maximum flush capacity cisterns |
| BS 5503:Part 1:1977 | Vitreous china washdown WC pans with horizontal outlet. Connecting dimensions |
| BS 5504-1:1977* EN 34:1992 | Wall hung WC pan. Wall hung WC pan with close coupled cistern. Connecting dimensions |
| BS 5504-2:1977* EN 38:1992 | Wall hung WC pan. Wall hung WC pan with independent water supply. Connecting dimensions |
| BS 5504-3:1977 | Wall hung WC pan. Wall hung WC pan. Materials, quality and functional dimensions other than connecting dimensions |
| BS 5504-4:1990 | Wall hung WC pan. Specification for wall hung WC pans for use with 7.5 L maximum flush capacity cisterns |
| BS 5505-1:1977* EN 35:1977 | Specification for bidets. Pedestal bidets over rim supply only. Connecting dimensions |
| BS 5505-3:1977 | Specification for bidets. Vitreous china bidets over rim supply only. Quality, workmanship and functional dimensions other than connecting dimensions |
| BS 5505:Part 2:1977* EN 36:1977 | Specification for bidets. Wall hung bidets over rim supply only. Connecting dimensions |
| BS 5506-3:1977 | Specification for wash basins. Wash basins (one or three tap holes). Materials, quality, design and construction |
| BS 5506:Part 1:1977* EN 31:1977 | Specification for wash basins. Pedestal wash basins. Connecting dimensions |
| BS 5506:Part 2:1977* EN 32:1977 | Specification for wash basins. Specification for wash basins. Wall hung wash basins. Connecting dimensions |
| BS 5520:1977 | Specification for vitreous china bowl urinals (rimless type) |
| BS 5572:1994 | Code of practice for sanitary pipework |
| BS 5627:1984 | Specification for plastics connectors for use with horizontal outlet vitreous china WC pans |
| BS 6100-3.3:1992 | Glossary of building and civil engineering terms. Services Sanitation |
| BS 6340-1:1983 | Shower units. Guide on choice of shower units and their components for use in private dwellings |
| BS 6340-2:1983 | Shower units. Specification for the installation of shower units |
| BS 6340-3:1985 | Shower units. Specification for prefabricated shower enclosures and shower cabinets |
| BS 6340-4:1984 | Shower units. Specification for shower heads and related equipment |
| BS 6340-5:1983 | Shower units. Specification for prefabricated shower trays made from acrylic material |
| BS 6340-6:1983 | Shower units. Specification for prefabricated shower trays made from porcelain enamelled cast iron |
| BS 6340-7:1983 | Shower units. Specification for prefabricated shower trays made from vitreous enamelled sheet steel |
| BS 6340-8:1985 | Shower units. Specification for prefabricated shower trays made from glazed ceramic |
| BS 6465-1:1994 | Sanitary installations. Code of practice for scale of provision, selection and installation of sanitary appliances |
| BS 6465-1:2006+A1:2009 | Sanitary installations. Code of practice for the design of sanitary facilities and scales of provision of sanitary and associated appliances |
| BS 6465-2:1996 | Sanitary installations. Code of practice for space requirements for sanitary appliances |
| BS 6465-3:2006 | Sanitary installations. Code of practice for the selection installation and maintenance of sanitary and associated appliances |
| BS 6465:Part 1:1984 | Sanitary installations. Code of practice for scale of provision, selection and installation of sanitary appliances |
| BS 6731:1988* EN 111:1982 | Specification for wall hung hand rinse basins. Connecting dimensions |
| BS 7015:1989* EN 263:1987 | Specification for cast acrylic sheet for baths and shower trays for domestic purposes |
| BS 7357:1990 | Specification for 7.5 L WC flushing cisterns |
| BS 7358:1990 | Specification for close coupled suites with flush capacity of 7.5 L maximum |
| BS 7942:2000 | Thermostatic mixing valves for use in care establishments |
| BS EN 1111:1999 | Sanitary tapware. Thermostatic mixing valves (PN 10). General technical specification |
| BS EN 1112:1997 | Shower outlets for (PN 10) sanitary tapware |
| BS EN 1113:1997 | Shower hoses for (PN 10) sanitary tapware |
| BS EN 111:1999 | Wall-hung hand rinse basins. Connecting dimensions |
| BS EN 111:2003 | Wall-hung hand rinse basins. Connecting dimensions |
| BS EN 12056-2:2000 | Gravity drainage systems inside buildings. Sanitary pipework, layout and calculation |
| BS EN 12541:2002 | Sanitary tapware. Pressure flushing valves and automatic closing urinal valves PN 10 |
| BS EN 12764:2004+A1:2008 | Sanitary appliances. Specification for whirlpool baths |
| BS EN 1286:1999 | Sanitary tapware. Low pressure mechanical mixing valves. General technical specification |
| BS EN 1287:1999 | Sanitary tapware. Low pressure thermostatic mixing valves. General technical specifications |
| BS EN 13310:2003 | Kitchen sinks. Functional requirements and test methods |
| BS EN 13407:2006 | Wall-hung urinals. Functional requirements and test methods |
| BS EN 13558:2003 | Specifications for impact modified extruded acrylic sheets for shower trays for domestic purposes |
| BS EN 13559:2003 | Specifications for impact modified coextruded ABS/Acrylic sheets for baths and shower trays for domestic purposes |
| BS EN 13904:2003 | Low resistance shower outlets for sanitary tapware |
| BS EN 13905:2003 | Low resistance shower hoses for sanitary tapware |
| BS EN 14124:2004 | Inlet valves for flushing cisterns with internal overflow |
| BS EN 14296:2005 | Sanitary appliances. Communal washing troughs |
| BS EN 14428:2004+A1:2008 | Shower enclosures. Functional requirements and test methods |
| BS EN 14516:2006 | Baths for domestic purposes |
| BS EN 14527:2006 | Shower trays for domestic purposes |
| BS EN 14528:2005 | Bidets. Functional requirements and test methods |
| BS EN 14528:2007 | Bidets. Functional requirements and test methods |
| BS EN 14688:2006 | Sanitary appliances. Wash basins. Functional requirements and test methods |
| BS EN 15091:2006 | Sanitary tapware. Electronic opening and closing sanitary tapware |
| BS EN 15200:2007 | Sanitary appliances. Multifunction shower cabinets |
| BS EN 15334:2007 | Sanitary appliances. Methacrylic dispersions of high filler content |
| BS EN 15389:2008 | Industrial valves. Performance characteristics of thermoplastic valves when used as construction products |
| BS EN 198:2008 | Sanitary appliances. Baths made from crosslinked cast acrylic sheets. Requirements and test methods |
| BS EN 200:1992 | Sanitary tapware. General technical specifications for single taps and mixer taps (nominal size 1/2) PN 10. Minimum flow pressure of 0.05 MPa (0.5 bar) |
| BS EN 200:2008 | Sanitary tapware. Single taps and combination taps for water supply systems of type 1 and type 2. General technical specification |
| BS EN 232:1992 | Baths. Connecting dimensions |
| BS EN 232:2003 | Baths. Connecting dimensions |
| BS EN 246:1992 | Sanitary tapware. General specifications for flow rate regulators |
| BS EN 246:2003 | Sanitary tapware. General specifications for flow rate regulators |
| BS EN 248:1992 | Sanitary taps: general technical specifications for electrodeposited nickel chrome coatings |
| BS EN 248:2002 | Sanitary tapware. General specification for electrodeposited coatings of Ni-Cr |
| BS EN 251:1992 | Shower trays. Connecting dimensions |
| BS EN 251:2003 | Shower trays. Connecting dimensions |
| BS EN 263:2002 | Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes |
| BS EN 263:2008 | Sanitary appliances. Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes |
| BS EN 274-1:2002 | Waste fittings for sanitary appliances. Requirements |
| BS EN 274-2:2002 | Waste fitting for sanitary appliances. Test methods |
| BS EN 274-3:2002 | Waste fittings for sanitary appliances. Quality control |
| BS EN 274:1993 | Sanitary tapware. Waste fittings for basins, bidets and baths. General technical specifications |
| BS EN 31:1999 | Pedestal wash basins. Connecting dimensions |
| BS EN 329:1997 | Sanitary tapware. Waste fittings for shower trays. General technical specifications |
| BS EN 32:1999 | Wall-hung wash basins. Connecting dimensions |
| BS EN 33:1999 | Pedestal W.C. pans with close-coupled flushing cistern. Connecting dimensions |
| BS EN 33:2003 | Pedestal W.C. pans with close-coupled flushing cistern. Connecting dimensions |
| BS EN 35:2000 | Pedestal bidets with over-rim supply. Connecting dimensions |
| BS EN 36:1999 | Wall-hung bidets with over-rim supply. Connecting dimensions |
| BS EN 37:1999 | Pedestal W.C. pans with independent water supply. Connecting dimensions |
| BS EN 411:1995 | Sanitary tapware. Waste fittings for sinks. General technical specifications |
| BS EN 60335-2-84:1999* IEC 60335-2-84:1999 | Specification for safety of household and similar electrical appliances. Particular requirements for toilets |
| BS EN 60335-2-84:2003 | Specification for safety of household and similar electrical appliances. Particular requirements for toilets |
| BS EN 60335-2-84:2003+A1:2008 | Household and similar electrical appliances. Safety. Particular requirements for toilets |
| BS EN 60745-2-21:2007 | Hand-held motor-operated electric tools. Safety. Particular requirements for drain cleaners |
| BS EN 695:1997 | Kitchen sinks. Connecting dimensions |
| BS EN 695:2005 | Kitchen sinks. Connecting dimensions |
| BS EN 80:2001 | Wall-hung urinals. Connecting dimensions |
| BS EN 816:1997 | Sanitary tapware. Automatic shut-off valves PN 10 |
| BS EN 817:1998 | Sanitary tapware. Mechanical mixers (PN 10). General technical specifications |
| BS EN 817:2008 | Sanitary tapware. Mechanical mixing valves (PN 10). General technical specifications |
| BS EN 997:1999 | WC pans with integral trap |
| BS EN 997:2003 | WC pans and WC suites with integral trap |
| BS EN ISO 3822-2:1996 | Acoustics. Laboratory tests on noise emission from appliances and equipment used in water supply installations. Mounting and operating conditions for draw-off taps and mixing valves |
