| BS 3456-202.139:1991 | Specification for safety of household and similar electrical appliances. Particular requirements. Room humidifiers |
| BS 416-1:1990 | Discharge and ventilating pipes and fittings, sand-cast or spun in cast iron. Specification for spigot and socket systems |
| BS 416-2:1990 | Discharge and ventilating pipes and fittings, sand-cast or spun in cast iron. Specification for socketless systems |
| BS 4718:1971 | Methods of test for silencers for air distribution systems |
| BS 4773-1.1:1991 | Methods for testing and rating air terminal devices for air distribution systems. Aerodynamic testing. Testing under laboratory conditions |
| BS 4773:Part 2:1989* EN 25135:1991* ISO 5135-1984 | Methods for testing and rating air terminal devices for air distribution systems. Acoustic testing |
| BS 4856-1:1972 | Methods for testing and rating fan coil units, unit heaters and unit coolers. Thermal and volumetric performance for heating duties; without additional ducting |
| BS 4856-2:1975 | Methods for testing and rating fan coil units, unit heaters and unit coolers. Thermal and volumetric performance for cooling duties: without additional ducting |
| BS 4856-3:1975 | Methods for testing and rating fan coil units, unit heaters and unit coolers. Thermal and volumetric performance for heating and cooling duties; with additional ducting |
| BS 4856-4:1997 | Methods for testing and rating fan coil units, unit heaters and unit coolers. Determination of sound power levels of fan coil units, unit heaters and unit coolers using reverberating rooms |
| BS 4856:Part 4:1978 | Methods for testing and rating fan coil units, unit heaters and unit coolers. Acoustic performance; without additional ducting |
| BS 4856:Part 5:1979 | Methods for testing and rating fan coil units, unit heaters and unit coolers. Acoustic performance; with ducting |
| BS 4857-1:1972 | Methods for testing and rating terminal reheat units for air distribution systems. Thermal and aerodynamic performance |
| BS 4857-2:1978 | Methods for testing and rating terminal reheat units for air distribution systems. Acoustic testing and rating |
| BS 4954-1:1973 | Methods for testing and rating induction units for air distribution systems. Thermal and aerodynamic performance |
| BS 4954-2:1978 | Methods for testing and rating induction units for air distribution systems. Acoustic testing and rating |
| BS 4979:1986 | Methods for aerodynamic testing of constant and variable dual or single duct boxes, single duct units and induction boxes for air distribution systems |
| BS 5141-1:1975 | Specification for air heating and cooling coils. Method of testing for rating of cooling coils |
| BS 5502-52:1991 | Buildings and structures for agriculture. Code of practice for design of alarm systems, emergency ventilation and smoke ventilation for livestock housing |
| BS 5588-9:1989 | Fire precautions in the design, construction and use of buildings. Code of practice for ventilation and air conditioning ductwork |
| BS 5588-9:1999 | Fire precautions in the design, construction and use of buildings. Code of practice for ventilation and air conditioning ductwork |
| BS 5643:1984 | Glossary of refrigeration, heating, ventilating and air-conditioning terms |
| BS 5720:1979 | Code of practice for mechanical ventilation and air conditioning in buildings |
| BS 5726:2005 | Microbiological safety cabinets. Information to be supplied by the purchaser to the vendor and to the installer, and siting and use of cabinets. Recommendations and guidance |
| BS 5925:1991 | Code of practice for ventilation principles and designing for natural ventilation |
| BS 6762-2:1991 | Services for leisure accommodation vehicles and transportable accommodation units. Code of practice for the installation of solid fuel fired heating in park homes and transportable accommodation units |
| BS 6762:Part 3:1989* ISO 7420:1987 | Services for leisure accommodation vehicles and transportable accommodation units. Specification for oil-fired heating systems |
| BS 7074-3:1989 | Application, selection and installation of expansion vessels and ancillary equipment for sealed water systems. Code of practice for chilled and condenser systems |
| BS 7120:1989 | Specification for rating and performance of air to liquid and liquid to liquid chilling packages |
| BS 7346-5:2005 | Components for smoke and heat control systems. Functional recommendations and calculation methods for smoke and heat exhaust ventilation systems, employing time-dependent design fires. Code of practice |
| BS 7643-2:1993* ISO 6242-2:1992 | Building construction. Expression of users' requirements. Air purity requirements |
| BS 7989:2001 | Specification for recirculatory filtration fume cupboards |
| BS EN 12097:2006 | Ventilation for buildings. Requirements for ductwork components to facilitate maintenance of ductwork systems |
| BS EN 12102:2008 | Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling. Measurement of airborne noise. Determination of the sound power level |
| BS EN 12220:1998 | Ventilation for buildings. Ductwork. Dimensions of circular flanges for general ventilation |
| BS EN 12236:2002 | Ventilation for buildings. Ductwork hangers and supports. Requirements for strength |
| BS EN 12237:2003 | Ventilation for buildings. Ductwork. Strength and leakage of circular sheet metal ducts |
| BS EN 12238:2001 | Ventilation for buildings. Air terminal devices. Aerodynamic testing and rating for mixed flow application |
| BS EN 12239:2001 | Ventilation for buildings. Air terminal devices. Aerodynamic testing and rating for displacement flow applications |
| BS EN 12309-1:2000 | Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW. Safety |
| BS EN 12309-2:2000 | Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW. Rational use of energy |
| BS EN 12469:2000 | Biotechnology. Performance criteria for microbiological safety cabinets |
| BS EN 12589:2001 | Ventilation for buildings. Air terminal units. Aerodynamic testing and rating of constant and variable rate terminal units |
| BS EN 12599:2000 | Ventilation for buildings. Tests procedures and measuring methods for handing over installed ventilation and air conditioning systems |
| BS EN 12735-1:2001 | Copper and copper alloys. Seamless, round copper tubes for air conditioning and refrigeration. Tubes for piping systems |
| BS EN 12735-2:2001 | Copper and copper alloys. Seamless, round copper tubes for air conditioning and refrigeration. Tubes for equipment |
| BS EN 12792:2003 | Ventilation for buildings. Symbols, terminology and graphical symbols |
| BS EN 13030:2001 | Ventilation for buildings. Terminals. Performance testing of louvres subjected to simulated rain |
| BS EN 13053:2001 | Ventilation for buildings. Air handling units. Ratings and performance for units, components and sections |
| BS EN 13053:2006 | Ventilation for buildings. Air handling units. Rating and performance for units, components and sections |
| BS EN 13141-10:2008 | Ventilation for buildings. Performance testing of components/products for residential ventilation. Humidity controlled extract air terminal device |
| BS EN 13141-1:2004 | Ventilation for buildings. Performance testing of components/products for residential ventilation. Externally and internally mounted air transfer devices |
| BS EN 13141-2:2004 | Ventilation for buildings. Performance testing of components/products for residential ventilation. Exhaust and supply air terminal devices |
| BS EN 13141-3:2004 | Ventilation for buildings. Performance testing of components/products for residential ventilation. Range hoods for residential use |
| BS EN 13141-4:2004 | Ventilation for buildings. Performance testing of components/products for residential ventilation. Fans used in residential ventilation systems |
| BS EN 13141-5:2004 | Ventilation for buildings. Performance testing of components/products for residential ventilation. Cowls and roof outlet terminal devices |
| BS EN 13141-6:2004 | Ventilation for buildings. Performance testing of components/products for residential ventilation. Exhaust ventilation system packages used in a single dwelling |
| BS EN 13141-7:2004 | Ventilation for buildings. Performance testing of components/products for residential ventilation. Performance testing of a mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for single family dwellings |
| BS EN 13141-8:2006 | Ventilation for buildings. Performance testing of components/products for residential ventilation. Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for a single room |
| BS EN 13141-9:2008 | Ventilation for buildings. Performance testing of components/products for residential ventilation. Externally mounted humidity controlled air transfer device |
| BS EN 13142:2004 | Ventilation for buildings. Components/products for residential ventilation. Required and optional performance characteristics |
| BS EN 13180:2002 | Ventilation for buildings. Ductwork. Dimensions and mechanical requirements for flexible ducts |
| BS EN 13181:2001 | Ventilation for buildings. Terminals. Performance testing of louvres. Performance testing of louvres subject to simulated sand |
| BS EN 13182:2002 | Ventilation for buildings. Instrumentation requirements for air velocity measurements in ventilated spaces |
| BS EN 13264:2001 | Ventilation for buildings. Floor mounted air terminal devices. Tests for structural classification |
| BS EN 13403:2003 | Ventilation for buildings. Non metallic ducts. Ductwork made from insulation ductboards |
| BS EN 13410:2001 | Gas-fired overhead radiant heaters. Ventilation requirements for non-domestic premises |
| BS EN 13465:2004 | Ventilation for buildings. Calculation methods for the determination of air flow rates in dwellings |
| BS EN 13779:2004 | Ventilation for non-residential buildings. Performance requirements for ventilation and room-conditioning systems |
| BS EN 13779:2007 | Ventilation for non-residential buildings. Performance requirements for ventilation and room-conditioning systems |
| BS EN 14134:2004 | Ventilation for buildings. Performance testing and installation checks of residential ventilation systems |
| BS EN 14175-1:2003 | Fume Cupboards. Vocabulary |
| BS EN 14175-2:2003 | Fume cupboards. Safety and performance requirements |
| BS EN 14175-3:2003 | Fume cupboards. Type test methods |
| BS EN 14175-4:2004 | Fume cupboards. On-site test methods |
| BS EN 14175-6:2006 | Fume cupboards. Variable air volume fume cupboards |
| BS EN 14239:2004 | Ventilation for buildings. Ductwork. Measurement of ductwork surface area |
| BS EN 14240:2004 | Ventilation for buildings. Chilled ceilings. Testing and rating |
| BS EN 14277:2006 | Ventilation for buildings. Air terminal devices. Method for airflow measurement by calibrated sensors in or close to ATD/plenum boxes |
| BS EN 14518:2005 | Ventilation for buildings. Chilled beams. Testing and rating of passive chilled beams |
| BS EN 14989-2:2007 | Chimneys. Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications. Flue and air supply ducts for room sealed appliances |
| BS EN 1505:1998 | Ventilation for buildings. Sheet metal air ducts and fittings with rectangular cross-section. Dimensions |
| BS EN 1506:1998 | Ventilation for buildings. Sheet metal air ducts and fittings with circular cross section. Dimensions |
| BS EN 1506:2007 | Ventilation for buildings. Sheet metal air ducts and fittings with circular cross-section. Dimensions |
| BS EN 1507:2006 | Ventilation for buildings. Sheet metal air ducts with rectangular section. Requirements for strength and leakage |
| BS EN 15116:2008 | Ventilation in buildings. Chilled beams. Testing and rating of active chilled beams |
| BS EN 15218:2006 | Air conditioners and liquid chilling packages with evaporatively cooled condenser and with electrically driven compressors for space cooling. Terms, definitions, test conditions, test methods and requirements |
| BS EN 15239:2007 | Ventilation for buildings. Energy performance of buildings Guidelines for inspection of ventilation systems |
| BS EN 15240:2007 | Ventilation for buildings. Energy performance of buildings Guidelines for inspection of air-conditioning systems |
| BS EN 15241:2007 | Ventilation for buildings. Calculation methods for energy losses due to ventilation and infiltration in commercial buildings |
| BS EN 15242:2007 | Ventilation for buildings. Calculation methods for the determination of air flow rates in buildings including infiltration |
| BS EN 15243:2007 | Ventilation for buildings. Calculation of room temperatures and of load and energy for buildings with room conditioning systems |
| BS EN 15377-1:2008 | Heating systems in buildings. Design of embedded water based surface heating and cooling systems. Determination of the design heating and cooling capacity |
| BS EN 15377-2:2008 | Heating systems in buildings. Design of embedded water based surface heating and cooling systems. Design, dimensioning and installation |
| BS EN 15423:2008 | Ventilation for buildings. Fire precaution for air distribution systems in buildings |
| BS EN 1886:1998 | Ventilation for buildings. Air handling units. Mechanical performance |
| BS EN 1886:2007 | Ventilation for buildings. Air handling units. Mechanical performance |
| BS EN 60335-2-40:1993 | Specification for safety of household and similar electrical appliances. Particular requirements. Electric heat pumps air conditioners and dehumidifiers |
| BS EN 60335-2-40:1998 | Specification for safety of household and similar electrical appliances. Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers |
| BS EN 60335-2-80:2003 | Household and similar electrical appliances. Safety. Particular requirements for fans |
| BS EN 60335-2-88:1997* IEC 60335-2-88:1997 | Specification for safety of household and similar electrical appliances. Particular requirements. Humidifiers intended for use with heating, ventilation, or air-conditioning systems |
| BS EN 60335-2-88:2002 | Specification for safety of household and similar electrical appliances. Particular requirements. Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems |
| BS EN 60335-2-98:1997* IEC 60335-2-98:1997 | Specification for safety of household and similar electrical appliances. Particular requirements. Humidifiers |
| BS EN 779:1993 | Particulate air filters for general ventilation. Requirements, testing, marking |
| BS EN 779:2002 | Particulate air filters for general ventilation. Determination of the filtration performance |
| BS EN 810:1997 | Dehumidifiers with electrically driven compressors. Rating tests, marking, operational requirements and technical data sheet |
| BS EN 814-1:1997 | Air conditioners and heat pumps with electrically driven compressors. Cooling mode. Terms, definitions and designations |
| BS EN 814-2:1997 | Air conditioners and heat pumps with electrically driven compressors. Cooling mode. Testing and requirements for marking |
| BS EN 814-3:1997 | Air conditioners and heat pumps with electrically driven compressors. Cooling mode. Requirements |
| BS EN ISO 11691:1997 | Acoustics. Measurement of insertion loss of ducted silencers without flow. Laboratory survey method |
| BS EN ISO 5135:1999 | Acoustics. Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room |
| BS ISO 10294-1:1996 | Fire-resistance tests. Fire dampers for air distribution systems. Test method |
| BS ISO 10294-2:1999 | Fire-resistance tests. Fire dampers for air distribution systems. Classification, criteria and field of application of test results |
| BS ISO 10294-3:1999 | Fire-resistance tests. Fire dampers for air distribution systems. Guidance on the test method |
| BS ISO 10294-4:2001 | Fire-resistance tests. Fire dampers for air distribution systems. Test of thermal release mechanism |
| BS ISO 10294-5:2005 | Fire-resistance tests. Fire dampers for air distribution systems. Intumescent fire dampers |
| DD CEN/TS 14175-5:2006 | Fume cupboards. Recommendations for installation and maintenance |
| DD ENV 12097:1997 | Ventilation for buildings. Ductwork. Requirements for ductwork components to facilitate maintenance of ductwork systems |
| DD ENV 12102:1996 | Air conditioners, heat pumps and dehumidifiers with electrically driven compressors. Measurement of airborne noise. Determination of the sound power level |
| PD 6611:1997* CR 12792:1997 | Ventilation for buildings. Symbols and terminology |
| PD CEN/TR 14788:2006 | Ventilation for buildings. Design and dimensioning of residential ventilation systems |
| PD CR 14378:2002* CR 14378:2002 | Ventilation for buildings. Experimental determination of mechanical energy loss coefficients of air handling components |
| PD CR 1752:1999 | Ventilation for buildings. Design criteria for the indoor environment |
