| BIP 2177:2008 | Hot and Cold Water Supply. 3rd edition |
| BS 1010-2:1973 | Specification for draw-off taps and stopvalves for water services (screw-down pattern). Draw-off taps and above-ground stopvalves |
| BS 1212-1:1990 | Float operated valves. Specification for piston type float operated valves (copper alloy body) (excluding floats) |
| BS 1212-2:1990 | Float operated valves. Specification for diaphragm type float operated valves (copper alloy body) (excluding floats) |
| BS 1212-3:1990 | Float operated valves. Specification for diaphragm type float operated valves (plastics bodied) for cold water services only (excluding floats) |
| BS 1212-4:1991 | Float operated valves. Specification for compact type float operated valves for WC flushing cisterns (including floats) |
| BS 1565-1:1949 | Specification for galvanized mild steel indirect cylinders annular or saddle-back type. Imperial units |
| BS 1565-2:1973 | Specification for galvanized mild steel indirect cylinders annular or saddle-back type. Metric units |
| BS 1566-1:1984 | Copper indirect cylinders for domestic purposes. Specification for double feed indirect cylinders |
| BS 1566-1:2002 | Copper indirect cylinders for domestic purposes. Open vented copper cylinders. Requirements and test methods |
| BS 1566-2:1984 | Copper indirect cylinders for domestic purposes. Specification for single feed indirect cylinders |
| BS 1968:1953 | Specification for floats for ballvalves (copper) |
| BS 2456:1990 | Specification for floats (plastics) for float operated valves for cold water services |
| BS 2580:1979 | Specification for underground plug cocks for cold water services |
| BS 2879:1980 | Specification for draining taps (screw-down pattern) |
| BS 3198:1981 | Specification for copper hot water storage combination units for domestic purposes |
| BS 3284:1967 | Specification for polythene pipe (Type 50) for cold water services |
| BS 3505:1986 | Specification for unplasticized polyvinyl chloride (PVC-U) pressure pipes for cold potable water |
| BS 4127:1994 | Specification for light gauge stainless steel tubes, primarily for water applications |
| BS 417-1:1964 | Specification for galvanized low carbon steel cisterns, cistern lids, tanks and cylinders. Imperial units |
| BS 417-2:1987 | Specification for galvanized low carbon steel cisterns, cistern lids, tanks and cylinders. Metric units |
| BS 4213:1991 | Specification for cold water storage and combined feed and expansion cisterns (polyolefin or olefin copolymer) up to 500 L capacity used for domestic purposes |
| BS 4213:2004 | Cisterns for domestic use. Cold water storage and combined feed and expansion (thermoplastic) cisterns up to 500 l. Specification |
| BS 4346-1:1969 | Joints and fittings for use with unplasticized PVC pressure pipes. Injection moulded unplasticized PVC fittings for solvent welding for use with pressure pipes, including potable water supply |
| BS 4814:1990 | Specification for expansion vessels using an internal diaphragm, for sealed hot water heating systems |
| BS 534:1990 | Specification for steel pipes, joints and specials for water and sewage |
| BS 5388:1976 | Specification for spray taps |
| BS 5412:Part 1:1976* BS 5413:Part 1:1976 | Specification for the performance of draw-off taps with metal bodies for water services. Dimensional and design characteristics |
| BS 5412:Part 2:1976* BS 5413:Part 2:1976 | Specification for the performance of draw-off taps with metal bodies for water services. Water tightness and pressure resistance characteristics |
| BS 5412:Part 3:1976* BS 5413:Part 3:1976 | Specification for the performance of draw-off taps with metal bodies for water services. Hydraulic characteristics |
| BS 5412:Part 4:1976* BS 5413:Part 4:1976 | Specification for the performance of draw-off taps with metal bodies for water services. Mechanical and endurance characteristics |
| BS 5412:Part 5:1976* BS 5413:Part 5:1976 | Specification for the performance of draw-off taps with metal bodies for water services. Physio-chemical characteristics: materials, coatings |
| BS 5433:1976 | Specification for underground stopvalves for water services |
| BS 5480:1990 | Specification for glass reinforced plastics (GRP) pipes, joints and fittings for use for water supply or sewerage |
| BS 5615:1985 | Specification for insulating jackets for domestic hot water storage cylinders |
| BS 5779:1979 | Specification for spray mixing taps |
| BS 5834-1:1985 | Surface boxes, guards and underground chambers for gas and waterworks purposes. Specification for guards, including foundation units |
| BS 5834-1:2009 | Surface boxes, guards and underground chambers for the purposes of utilities. Specification for guards and plinths |
| BS 5834-2:1983 | Surface boxes, guards and underground chambers for gas and waterworks purposes. Specification for small surface boxes |
| BS 5834-3:1985 | Surface boxes, guards and underground chambers for gas and waterworks purposes. Specification for large surface boxes |
| BS 5834-4:1989 | Surface boxes, guards and underground chambers for gas and waterworks purposes. Specification for preformed chambers |
| BS 5955-8:1990 | Plastics pipework (thermoplastics materials). Specification for the installation of thermoplastics pipes and associated fittings for use in domestic hot and cold water services and heating systems |
| BS 5955-8:2001 | Plastics pipework (thermoplastics materials). Specification for the installation of thermoplastic pipes and associated fittings for use in domestic hot and cold services and heating systems in buildings |
| BS 6144:1990 | Specification for expansion vessels using an internal diaphragm, for unvented hot water supply systems |
| BS 6281-1:1992 | Devices without moving parts for the prevention of contamination of water by backflow. Specification for type A air gaps |
| BS 6281-2:1982 | Devices without moving parts for the prevention of contamination of water by backflow. Specification for type B air gaps |
| BS 6281-3:1982 | Devices without moving parts for the prevention of contamination of water by backflow. Specification for pipe interrupters of nominal size up to and including DN 42 |
| BS 6282-1:1982 | Devices with moving parts for the prevention of contamination of water by backflow. Specification for check valves of nominal size up to and including DN 54 |
| BS 6282-2:1982 | Devices with moving parts for the prevention of contamination of water by backflow. Specification for terminal anti-vacuum valves of nominal size up to and including DN 54 |
| BS 6282-3:1982 | Devices with moving parts for the prevention of contamination of water by backflow. Specification for in-line anti-vacuum valves of nominal size up to and including DN 42 |
| BS 6282-4:1982 | Devices with moving parts for the prevention of contamination of water by backflow. Specification for combined check and anti-vacuum valves of nominal size up to and including DN 42 |
| BS 6283-1:1991 | Safety and control devices for use in hot water systems. Specification for expansion valves for pressures up to and including 10 bar |
| BS 6283-2:1991 | Safety and control devices for use in hot water systems. Specifications for temperature relief valves for pressures from 1 bar to 10 bar |
| BS 6283-3:1991 | Safety and control devices for use in hot water systems. Specification for combined temperature and pressure relief valves for pressures from 1 bar to 10 bar |
| BS 6283-4:1991 | Safety and control devices for use in hot water systems. Specification for drop-tight pressure reducing valves of nominal size up to and including DN 50 for supply pressures up to and including 12 bar |
| BS 6316:1992 | Code of Practice for test pumping of water wells |
| BS 6572:1985 | Specification for blue polyethylene pipes up to nominal size 63 for below ground use for potable water |
| BS 65:1991 | Specification for vitrified clay pipes, fittings and ducts also flexible mechanical joints for use solely with surface water pipes and fittings |
| BS 6675:1986 | Specification for servicing valves (copper alloy) for water services |
| BS 6700:1987 | Specification for design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages |
| BS 6700:1997 | Specification for design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages |
| BS 6700:2006+A1:2009 | Design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages Specification |
| BS 6730:1986 | Specification for black polyethylene pipes up to nominal size 63 for above ground use for cold potable water |
| BS 6759-1:1984 | Safety valves. Specification for safety valves for steam and hot water |
| BS 6956-1:1988 | Jointing materials and compounds. Specification for corrugated metal joint rings |
| BS 6956-5:1992 | Jointing materials and compounds. Specification for jointing compounds for use with water, low pressure saturated steam 1st family gases (excluding coal gas) and 2nd family gases |
| BS 699:1984 | Specification for copper direct cylinders for domestic purposes |
| BS 7181:1989 | Specification for storage cisterns up to 500 L actual capacity for water supply for domestic purposes |
| BS 7206:1990 | Specification for unvented hot water storage units and packages |
| BS 7291-1:1990 | Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings. General requirements |
| BS 7291-1:2001 | Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings. General requirements |
| BS 7291-1:2006 | Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings. General requirements |
| BS 7291-2:1990 | Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings. Specification for polybutylene (PB) pipes and associated fittings |
| BS 7291-2:2001 | Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings. Specification for polybutylene (PB) pipes and associated fittings |
| BS 7291-2:2006 | Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings. Specification for polybutylene (PB) pipes and associated fittings |
| BS 7291-3:1990 | Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings. Specification for crosslinked polyethylene (PE-X) pipes and associated fittings |
| BS 7291-3:2001 | Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings. Specification for cross-linked polyethylene (PE-X) pipes and associated fittings |
| BS 7291-3:2006 | Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings. Specification for cross-linked polyethylene (PE-X) pipes and associated fittings |
| BS 7291-4:1990 | Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings. Specification for chlorinated polyvinyl chloride (PVC-C) pipes and associated fittings and solvent cement |
| BS 7350:1990 | Specification for double regulating globe valves and flow measurement devices for heating and chilled water systems |
| BS 7491-1:1991 | Glass fibre reinforced plastics cisterns for cold water storage. Specification for one-piece cisterns of capacity up to 500 L |
| BS 7491-2:1992 | Glass fibre reinforced plastics cisterns for cold water storage. Specification for one-piece cisterns of nominal capacity from 500 L to 25000 L |
| BS 7491-3:1994 | Glass fibre reinforced plastics cisterns for cold water storage. Specification for sectional tanks |
| BS 853-1:1996 | Specification for vessels for use in heating systems. Calorifiers and storage vessels for central heating and hot water supply |
| BS 879-1:1985 | Water well casing. Specification for steel tubes for casing |
| BS 879-2:1988 | Water well casing. Specification for thermoplastics tubes for casing and slotted casing |
| BS EN 10312:2002 | Welded stainless steel tubes for the conveyance of aqueous liquids inclu ding water for human consumption. Technical delivery conditions |
| BS EN 1074-1:2000 | Valves for water supply. Fitness for purpose requirements and appropriate verification tests. General requirements |
| BS EN 1074-2:2000 | Valves for water supply. Fitness for purpose requirements and appropriate verification tests. Isolating valves |
| BS EN 1074-3:2000 | Valves for water supply. Fitness for purpose requirements and appropriate verification tests. Check valves |
| BS EN 1074-4:2000 | Valves for water supply. Fitness for purpose requirements and appropriate verification tests. Air valves |
| BS EN 1213:2000 | Building valves. Copper alloy stopvalves for potable water supply in buildings. Tests and requirements |
| BS EN 12201-1:2003 | Plastic piping systems for water supply. Polyethylene (PE) General |
| BS EN 12201-2:2003 | Plastic piping systems for water supply. Polyethylene (PE) Pipes |
| BS EN 12201-3:2003 | Plastic piping systems for water supply. Polyethylene (PE) Fittings |
| BS EN 12201-4:2001 | Plastic piping systems for water supply. Polyethylene (PE) Valves |
| BS EN 12201-5:2003 | Plastic piping systems for water supply. Polyethylene (PE) Fitness for purpose of the system |
| BS EN 12502-1:2004 | Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in water distribution and storage systems. General |
| BS EN 12502-2:2004 | Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in water distribution and storage systems. Influencing factors for copper and copper alloys |
| BS EN 12502-3:2004 | Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in water distribution and storage systems. Influencing factors for hot dip galvanised ferrous materials |
| BS EN 12502-4:2004 | Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in water distribution and storage systems. Influencing factors for stainless steels |
| BS EN 12502-5:2004 | Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in water distribution and storage systems. Influencing factors for cast iron unalloyed and low alloyed steels |
| BS EN 12729:2002 | Devices to prevent pollution by backflow of potable water. Controllable backflow preventer with reduced pressure zone. Family B. Type A |
| BS EN 13076:2003 | Devices to prevent pollution by backflow of potable water. Unrestricted air gap. Family A. Type A |
| BS EN 13077:2008 | Devices to prevent pollution by backflow of potable water. Air gap with non-circular overflow (unrestricted). Family A. Type B |
| BS EN 13079:2003 | Devices to prevent pollution by backflow of potable water. Air gap with injector. Family A. Type D |
| BS EN 13280:2001 | Specification for glass fibre reinforced cisterns of one-piece and sectional construction, for the storage, above ground of cold water |
| BS EN 13443-1:2002 | Water conditioning equipment inside buildings. Mechanical filters. Particle rating 80 mum to 150 mum. Requirements for performances, safety and testing |
| BS EN 13443-2:2005+A1:2007 | Water conditioning equipment inside buildings. Mechanical filters. Particle rating 1 mum to less than 80 mum. Requirements for performance, safety and testing |
| BS EN 14095:2003 | Water conditioning equipment inside buildings. Electrolytic treatment with aluminium anodes. Requirements for performance, safety and testing |
| BS EN 14154-1:2005 | Water meters. General requirements |
| BS EN 14154-2:2005 | Water meters. Installation and conditions of use |
| BS EN 14154-3:2005 | Water meters. Test methods and equipment |
| BS EN 14367:2005 | Non controllable backflow preventer with different pressure zones. Family C, type A |
| BS EN 1444:2001 | Fibre-cement pipelines. Guide for laying and on-site work practices |
| BS EN 1452-1:1999 | Plastics piping systems for water supply. Unplasticized poly (vinyl chloride) (PVC-U). General |
| BS EN 1452-2:1999 | Plastics piping systems for water supply. Unplasticized poly (vinyl chloride) (PVC-U). Pipes |
| BS EN 1452-3:1999 | Plastics piping systems for water supply. Unplasticized poly (vinyl chloride) (PVC-U). Fittings |
| BS EN 1452-4:1999 | Plastics piping systems for water supply. Unplasticized poly (vinyl chloride) (PVC-U). Valves and ancillary equipment |
| BS EN 1452-5:1999 | Plastics piping systems for water supply. Unplasticized poly (vinyl chloride) (PVC-U). Fitness for purpose of the system |
| BS EN 14622:2005 | Devices to prevent pollution by backflow of potable water. Air gap with circular overflow (restricted). Family A, type F |
| BS EN 14623:2005 | Devices to prevent pollution by backflow of potable water. Air gaps with minimum circular overflow (verified by test or measurement). Family A, type G |
| BS EN 14652:2005+A1:2007 | Water conditioning equipment inside buildings. Membrane separation devices. Requirements for performance, safety and testing |
| BS EN 14743:2005+A1:2007 | Water conditioning equipment inside buildings. Softeners. Requirements for performance, safety and testing |
| BS EN 14812:2005+A1:2007 | Water conditioning equipment inside buildings. Chemical dosing systems. Pre-set dosing systems. Requirements for performance, safety and testing |
| BS EN 1487:2000 | Building valves. Hydraulic safety groups. Tests and requirements |
| BS EN 1488:2000 | Building valves. Expansion groups. Tests and requirements |
| BS EN 14897:2006+A1:2007 | Water conditioning equipment inside buildings. Devices using mercury low-pressure ultraviolet radiators. Requirements for performance, safety and testing |
| BS EN 14898:2006+A1:2007 | Water conditioning equipment inside buildings. Active media filters. Requirements for performance, safety and testing |
| BS EN 1489:2000 | Building valves. Pressure safety valves. Tests and requirements |
| BS EN 1490:2000 | Building valves. Combined temperature and pressure relief valves. Tests and requirements |
| BS EN 1491:2000 | Building valves. Expansion valves. Tests and requirements |
| BS EN 1508:1999 | Water supply. Requirements for systems and components for the storage of water |
| BS EN 15092:2008 | Building valves. Inline hot water supply tempering valves. Tests and requirements |
| BS EN 15096:2008 | Devices to prevent pollution by backflow of potable water. Hose Union anti-vacuum valves. DN 15 to DN 25 inclusive Family H, type B and type D. General technical specification |
| BS EN 15161:2006 | Water conditioning equipment inside buildings. Installation, operation, maintenance and repair |
| BS EN 15219:2006+A1:2007 | Water conditioning equipment inside buildings. Nitrate removal devices. Requirements for performance, safety and testing |
| BS EN 1567:1999 | Building valves. Water pressure reducing valves and combination water reducing valves. Requirements and tests |
| BS EN 1717:2000 | Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow |
| BS EN 253:1995 | Preinsulated bonded pipe systems for underground hot water networks. Pipe assembly of steel service pipes, polyurethane thermal insulation and outer casing of high density polyethylene |
| BS EN 448:1995 | Preinsulated bonded pipe systems for underground hot water networks. Fittings assemblies of steel service pipes, polyurethane thermal insulation and outer casing of high density polyethylene |
| BS EN 448:2003 | District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| BS EN 488:1995 | Preinsulated bonded pipe systems for underground hot water networks. Steel valve assembly of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| BS EN 488:2003 | District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| BS EN 489:1995 | Preinsulated bonded pipe systems for underground hot water networks. Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| BS EN 489:2003 | District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| BS EN 489:2009 | District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| BS EN 61770:2009 | Electric appliances connected to the water mains. Avoidance of backsiphonage and failure of hose-sets |
| BS EN 751-1:1997 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water. Anaerobic jointing compounds |
| BS EN 751-2:1997 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water. Non-hardening jointing compounds |
| BS EN 751-3:1997 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water. Unsintered PTFE tapes |
| BS EN 805:2000 | Water supply. Requirements for systems and components outside buildings |
| BS EN 806-1:2000 | Specifications for installations inside buildings conveying water for human consumption. General |
| BS EN 806-2:2005 | Specifications for installations inside buildings conveying water for human consumption. Design |
| BS EN 806-3:2006 | Specifications for installations inside buildings conveying water for human consumption. Pipe sizing. Simplified method |
| BS EN 852-1:1996* BS 2782-11:Method 1122A:1996 | Plastics piping systems for the transport of water intended for human consumption. Migration assessment. Determination of migration values of plastics pipes |
| BS EN ISO 15874-1:2003 | Plastics piping systems for hot and cold water installations. Polypropylene (PP). General |
| BS EN ISO 15874-2:2003 | Plastics piping systems for hot and cold water installations. Polypropylene (PP). Pipes |
| BS EN ISO 15874-3:2003 | Plastics piping systems for hot and cold water installations. Polypropylene (PP). Fittings |
| BS EN ISO 15874-5:2003 | Plastics piping systems for hot and cold water installations. Polypropylene (PP). Fitness for purpose of the system |
| BS EN ISO 15875-1:2003 | Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X). General |
| BS EN ISO 15875-2:2003 | Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X). Pipes |
| BS EN ISO 15875-3:2003 | Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X). Fittings |
| BS EN ISO 15875-5:2003 | Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X). Fitness for purpose of the system |
| BS EN ISO 15876-1:2003 | Plastics piping systems for hot and cold water installations. Polybutylene (PB). General |
| BS EN ISO 15876-2:2003 | Plastics piping systems for hot and cold water installations. Polybutylene (PB). Pipes |
| BS EN ISO 15876-3:2003 | Plastics piping systems for hot and cold water installations. Polybutylene (PB). Fittings |
| BS EN ISO 15876-5:2003 | Plastics piping systems for hot and cold water installations. Polybutylene (PB). Fitness for purpose of the system |
| BS EN ISO 15877-1:2003 | Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C). General |
| BS EN ISO 15877-1:2009 | Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C). General |
| BS EN ISO 15877-2:2003 | Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C). Pipes |
| BS EN ISO 15877-2:2009 | Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C). Pipes |
| BS EN ISO 15877-3:2003 | Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C). Fittings |
| BS EN ISO 15877-3:2009 | Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C). Fittings |
| BS EN ISO 15877-5:2003 | Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C). Fitness for purpose of the system |
| BS EN ISO 15877-5:2009 | Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C). Fitness for purpose of the system |
| BS EN ISO 21003-1:2008 | Multilayer piping systems for hot and cold water installations inside buildings. General |
| BS EN ISO 21003-2:2008 | Multilayer piping systems for hot and cold water installations inside buildings. Pipes |
| BS EN ISO 21003-3:2008 | Multilayer piping systems for hot and cold water installations inside buildings. Fittings |
| BS EN ISO 21003-5:2008 | Multilayer piping systems for hot and cold water installations inside buildings. Fitness for purpose of the system |
| BS EN ISO 3822-1:1999+A1:2008 | Acoustics. Laboratory tests on noise emission from appliances and equipment used in water supply installations. Method of measurement |
| BS EN ISO 3822-3:1997 | Acoustics. Laboratory tests on noise emission from appliances and equipment used in water supply installations. Mounting and operating conditions for in-line valves and appliances |
| BS EN ISO 3822-4:1997 | Acoustics. Laboratory tests on noise emission from appliances and equipment used in water supply installations. Mounting and operating conditions for special appliances |
| BS EN ISO 8795:2001 | Plastics piping systems for the transport of water intended for human consumption. Migration assessment. Determination of migration values of plastics pipes and fittings and their joints |
| BS ISO 16422:2006 | Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure. Specifications |
| BS ISO 4064-2:2001 | Measurement of water flow in closed conduits. Meters for cold potable water. Installation requirements and selection |
| BS ISO 4427-1:2007 | Plastics piping systems. Polyethylene (PE) pipes and fittings for water supply. General |
| BS ISO 4427-2:2007 | Plastics piping systems. Polyethylene (PE) pipes and fittings for water supply. Pipes |
| BS ISO 4427-3:2007 | Plastics piping systems. Polyethylene (PE) pipes and fittings for water supply. Fittings |
| CP 312-2:1973 | Code of practice for plastics pipework (thermoplastics material). Unplasticized PVC pipework for the conveyance of liquids under pressure |
| DD CEN ISO/TS 15874-7:2003 | Plastics piping systems for hot and cold water installations. Polypropylene (PP). Guidance for the assessment of conformity |
| DD CEN ISO/TS 15875-7:2003 | Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X). Guidance for the assessment of conformity |
| DD CEN ISO/TS 15876-7:2003 | Plastics piping systems for hot and cold water installations. Polybutylene (PB). Guidance for the assessment of conformity |
| DD CEN ISO/TS 15877-7:2003 | Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C). Guidance for the assessment of conformity |
| DD CEN ISO/TS 21003-7:2008 | Multilayer piping systems for hot and cold water installations inside buildings. Guidance for the assessment of conformity |
| DD CEN/TS 12201-7:2003 | Plastics piping systems for water supply. Polyethylene (PE). Guidance for the assessment of conformity |
| DD CEN/TS 14632:2006 | Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure. Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP). Guidance for the assessment of conformity |
| DD ENV 12108:2001 | Plastics piping systems. Guidance for the installation inside buildings of pressure systems for hot and cold water intended for human consumption |
| DD ENV 1452-6:2002 | Plastics piping systems for water supply. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for installation |
| DD ENV 1452-7:2001 | Plastics piping systems for water supply. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for the assessment of conformity |
| HB 10178:2000 | Hot and Cold Water Supply. 2nd edition |
