| BS 1431:1960 | Specification for wrought copper and wrought zinc rainwater goods |
| BS 3656:1981 | Specification for asbestos-cement pipes, joints and fittings for sewerage and drainage |
| BS 3868:1973 | Specification for prefabricated drainage stack units: galvanized steel |
| BS 3868:1995 | Specification for prefabricated drainage stack units in galvanized steel |
| BS 416-1:1990 | Discharge and ventilating pipes and fittings, sand-cast or spun in cast iron. Specification for spigot and socket systems |
| BS 416-2:1990 | Discharge and ventilating pipes and fittings, sand-cast or spun in cast iron. Specification for socketless systems |
| BS 437:1978 | Specification for cast iron spigot and socket drain pipes and fittings |
| BS 437:2008 | Specification for cast iron drain pipes, fittings and their joints for socketed and socketless systems |
| BS 4514:1983 | Specification for unplasticized PVC soil and ventilating pipes, fittings and accessories |
| BS 4514:2001 | Unplasticized PVC soil and ventilating pipes of 82.4 mm minimum mean outside diameter, and fittings and accessories of 82.4 mm and of other sizes. Specification |
| BS 4660:1989 | Specification for unplasticized polyvinyl chloride (PVC-U) pipes and plastics fittings of nominal sizes 110 and 160 for below ground gravity drainage and sewerage |
| BS 4660:2000 | Thermoplastics ancillary fittings of nominal sizes 110 and 160 for below ground gravity drainage and sewerage |
| BS 5178:1975 | Specification for prestressed concrete pipes for drainage and sewerage |
| BS 5254:1976 | Specification for polypropylene waste pipe and fittings (external diameter 34.6 mm, 41.0 mm and 54.1 mm) |
| BS 5255:1989 | Specification for thermoplastics waste pipe and fittings |
| BS 534:1990 | Specification for steel pipes, joints and specials for water and sewage |
| BS 5480:1990 | Specification for glass reinforced plastics (GRP) pipes, joints and fittings for use for water supply or sewerage |
| BS 5572:1994 | Code of practice for sanitary pipework |
| BS 5911-200:1994 | Precast concrete pipes, fittings and ancillary products. Specification for unreinforced and reinforced manholes and soakaways of circular cross section |
| BS 5911:Part 200:1989 | Precast concrete pipes, fittings and ancillary products. Specification for unreinforced and reinforced manholes and soakaways of circular cross section |
| BS 5955-6:1980 | Plastics pipework (thermoplastics materials). Code of practice for the installation of unplasticized PVC pipework for gravity drains and sewers |
| BS 6087:1990 | Specification for flexible joints for grey or ductile cast iron drainpipes and fittings (BS 437) and for discharge and ventilating pipes and fittings (BS 416) |
| BS 6297:1983 | Code of practice for design and installation of small sewage treatment works and cesspools |
| BS 6367:1983 | Code of practice for drainage of roofs and paved areas |
| BS 7158:1989 | Specification for plastics inspection chambers for drains |
| BS 7158:2001 | Plastics inspection chambers for drains and sewers. Specification |
| BS 8301:1985 | Code of practice for building drainage |
| BS 8490:2007 | Guide to siphonic roof drainage systems |
| BS 8515:2009 | Rainwater harvesting systems. Code of practice |
| BS EN 1054:1996* BS 2782-11:Method 1112C:1996 | Plastics piping systems. Thermoplastics piping systems for soil and waste discharge. Test method for airtightness of joints |
| BS EN 1055:1996* BS 2782-11:Method 1111A:1996 | Plastics piping systems. Thermoplastics piping systems for soil and waste discharge inside buildings. Test method for resistance to elevated temperature cycling |
| BS EN 1123-1:1999 | Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems. Requirements, testing, quality control |
| BS EN 1123-2:1999 | Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems. Dimensions |
| BS EN 12050-1:2001 | Wastewater lifting plants for buildings and sites. Principles of construction and testing. Lifting plants for wastewater containing faecal matter |
| BS EN 12050-2:2001 | Wastewater lifting plants for buildings and sites. Principles of construction and testing. Lifting plants for faecal-free wastewater |
| BS EN 12050-3:2001 | Wastewater lifting plants for buildings and sites. Principles of construction and testing. Lifting plants for wastewater containing faecal matter for limited applications |
| BS EN 12050-4:2001 | Wastewater lifting plants for buildings and sites. Principles of construction and testing. Non-return valves for faecal-free wastewater and wastewater containing faecal matter |
| BS EN 12056-1:2000 | Gravity drainage systems inside buildings. General and performance requirements |
| BS EN 12056-2:2000 | Gravity drainage systems inside buildings. Sanitary pipework, layout and calculation |
| BS EN 12056-3:2000 | Gravity drainage systems inside buildings. Roof drainage, layout and calculation |
| BS EN 12056-4:2000 | Gravity drainage systems inside buildings. Wastewater lifting plants. Layout and calculation |
| BS EN 12056-5:2000 | Gravity drainage systems inside buildings. Installation and testing, instructions for operation, maintenance and use |
| BS EN 12109:1999 | Vacuum drainage systems inside buildings |
| BS EN 12380:2002 | Air admittance valves for drainage systems. Requirements, test methods and evaluation of conformity |
| BS EN 12405-1:2005 | Gas meters. Conversion devices. Volume conversion |
| BS EN 1253-1:1999 | Gullies for buildings. Requirements |
| BS EN 1253-1:2003 | Gullies for buildings. Requirements |
| BS EN 1253-2:1999 | Gullies for buildings. Test methods |
| BS EN 1253-2:2003 | Gullies for buildings. Test methods |
| BS EN 1253-3:1999 | Gullies for buildings. Quality control |
| BS EN 1253-4:2000 | Gullies for buildings. Access covers |
| BS EN 1253-5:2003 | Gullies for buildings. Gullies with light liquids closure |
| BS EN 12666-1:2005 | Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE). Specifications for pipes, fittings and the system |
| BS EN 12763:2000 | Fibre-cement pipes and fittings for discharge systems for buildings. Dimensions and technical terms of delivery |
| BS EN 1293:1999 | General requirements for components used in pneumatically pressurized discharge pipes, drains and sewers |
| BS EN 1329-1:2000 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U). Specifications for pipes, fittings and the system |
| BS EN 13564-1:2002 | Anti-flooding devices for buildings. Requirements |
| BS EN 13564-2:2002 | Anti-flooding devices for buildings. Test methods |
| BS EN 13564-3:2003 | Anti-flooding devices for buildings. Quality assurance |
| BS EN 1401-1:1998 | Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinylchloride) (PVC-U). Specifications for pipes, fittings and the system |
| BS EN 14366:2004 | Laboratory measurement of noise from waste water installations |
| BS EN 1451-1:2000 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP). Specifications for pipes, fittings and the system |
| BS EN 1453-1:2000 | Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings. Unplasticized poly (vinyl chloride) (PVC-U). Specifications for pipes and the system |
| BS EN 1455-1:2000 | Plastics piping systems for soil and waste (low and high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS). Specifications for pipes, fittings and the system |
| BS EN 15012:2007 | Plastics piping systems. Soil and waste discharge systems within the building structure. Performance characteristics for pipes, fittings and their joints |
| BS EN 1519-1:2000 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylene (PE). Specifications for pipes, fittings and the system |
| BS EN 1565-1:2000 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Styrene copolymer blends (SAN + PVC). Specifications for pipes, fittings and the system |
| BS EN 1566-1:2000 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C). Specification for pipes, fittings and the system |
| BS EN 1610:1998 | Construction and testing of drains and sewers |
| BS EN 1852-1:1998 | Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP). Specifications for pipes fittings and the system |
| BS EN 295-1:1991 | Vitrified clay pipes and fittings and pipe joints for drains and sewers. Requirements |
| BS EN 295-2:1991 | Vitrified clay pipes and fittings and pipe joints for drains and sewers. Quality control and sampling |
| BS EN 295-3:1991 | Vitrified clay pipes and fittings and pipe joints for drains and sewers. Test methods |
| BS EN 295-4:1995 | Vitrified clay pipes and fittings and pipe joints for drains and sewers. Requirements for special fittings, adaptors and compatible accessories |
| BS EN 295-5:1994 | Vitrified clay pipes and fittings and pipe joints for drains and sewers. Requirements for perforated vitrified clay pipes and fittings |
| BS EN 295-6:1996 | Vitrified clay pipes and fittings and pipe joints for drains and sewers. Requirements for vitrified clay manholes |
| BS EN 295-7:1996 | Vitrified clay pipes and fittings and pipe joints for drains and sewers. Requirements for vitrified clay pipes and joints for pipe jacking |
| BS EN 476:1998 | General requirements for components used in discharge pipes, drains and sewers for gravity systems |
| BS EN 588-1:1997 | Fibre-cement pipes for sewers and drains. Pipes, joints and fittings for gravity systems |
| BS EN 773:1999 | General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers |
| BS ISO 18672-1:2009 | Plastics piping systems for non-pressure drainage and sewerage. Polyester resin concrete (PRC). Pipes and fittings with flexible joints |
| DD CEN/TS 12666-2:2005 | Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE). Guidance for the assessment of conformity |
| DD CEN/TS 14578:2003 | Plastics piping systems for water supply or drainage and sewerage. Glass-reinforced thermosetting plastics (GPR) based on unsaturated polyester resin (UP). Recommended practice for installation |
| DD CEN/TS 14632:2006 | Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure. Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP). Guidance for the assessment of conformity |
| DD ENV 1329-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for the assessment of conformity |
| DD ENV 13801:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Thermoplastics Recommended practice for installation |
| DD ENV 1401-3:2001 | Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinylchloride) (PVC-U). Guidance for installation |
| DD ENV 1451-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP). Guidance for the assessment of conformity |
| DD ENV 1453-2:2001 | Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for the assessment of conformity |
| DD ENV 1455-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Acrylonitrile-butadiene- styrene (ABS). Guidance for the assessment of conformity |
| DD ENV 1519-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylene (PE). Guidance for the assessment of conformity |
| DD ENV 1565-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Styrene copolymer blends (SAN + PVC). Guidance for the assessment of conformity |
| DD ENV 1566-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C). Guidance for the assessment of conformity |
